GUIDE TO SETTING UP YOUR DJI & AUTEL SMART CONTROLLER WIRELESS CASTING TO YOUR AIRWORX GO-COMMAND:
Ensure your Airworx Go-Command monitor is powered on and you can see the Airworx Go-Command logo on the displaymirroring device)
Open your Smart Controller tablet / device settings
Navigate to "Display" settings on Smart Controllers or to "Connected Devices" on the DJI RC Plus
Scroll down to "Cast" or "preferences > case"
In the top right corner ensure you tap the 3 dots the first time and ENABLE
You should see the SSID for the "AIRWORX-XXXXX" module on your controller
Tap to select and connect, only using your back button to exit back to the pilotage app
ATTENTION AUTEL SMART CONTROLLER USERS:
We are aware of the lagging / delay in the wireless feed. We have tested DJI Smart Controllers, iOS and other Android tablets with different OS versions which yield normal operation. We have narrowed down that the issues are 100% specific to the Autel Smart Controller and OS / firmware version on that controller and its association with the screen casting feature within that OS. We recommend that you use a tethered HDMI cable connection to avoid the annoying lag. Unfortunately we have no control on the firmware and OS that Autel has pushed down.
***IF YOU HAVE ISSUES CONNECTING THE AIRWORX SCREEN MIRRORING MODULE TO YOUR SMART CONTROLLER - THE FIRST STEP TO RESOLVE IS RESETTING YOUR CONTROLLER FROM THE TABLET MENU AND STARTING FRESH.
IF YOU CONTINUE TO HAVE ISSUES, PLEASE DO NOT HESITATE TO TEXT, CALL OR EMAIL US AT 864-898-9444 OR SUPPORT@AIRWORXDRONE.COM
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device